660 brake fluid has a high dry boiling point of 622F (328C) and a wet boiling point of 399F (204C). For all types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Specially designed to resist extreme temperature generated by racing brakes (carbon and ceramic) only allowing a minimal air entrance for brake cooling.

TYPE OF USE

All types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Specially designed to resist extreme temperature generated by racing carbon and ceramic brakes allowing minimizing air entrance for brake cooling. Can be also used with conventional steel discs and clutch systems actuators. Widely exceeds DOT 3, DOT 4 and DOT 5.1 standards (except for DOT 5.1 viscosity at - 40°C).

PERFORMANCE

STANDARDS: FMVSS 116 DOT 4 / SAE J1703

Extreme thermal resistance and stability

Very high boiling point (328°C / 622°F), superior to conventional DOT 5.1 fluids (260°C / 500°F mini) and DOT 4 (230°C / 446°F mini) Enables effective brake even in extreme conditions. Better aerodynamic performance by reducing air entrance for brake cooling on cars.

Efficient when rainy

High wet boiling point (204°C / 399°F) superior to conventional DOT 5.1 non-silicone base fluid (180°C / 356°F mini) and DOT 4 (155°C / 311°F mini) enables to keep efficient braking in wet conditions. Brake fluids tend to absorb humidity from the air, which reduces the boiling point and increases the risk to get to “vapor lock” phenomena. The wet boiling point is measured by humidifying the product with about 3.5 % of water.

RECOMMENDATIONS

Avoid mixing with polyglycols based brake fluid. Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM). Store brake fluid in its original container tightly closed to prevent moisture absorption. Aggressive chemical product if contact with hands, paint or varnish. If skin contact, rinse thoroughly with water.

PROPERTIES

100% synthetic fluid, polyglycol bases.

Colour Amber

Dry boiling point 328 °C / 622 °F

Wet boiling point 204 °C / 399 °F

Viscosity at -40 °C (-40 °F) 1698 mm²/s

Viscosity at 100 °C (212 °F) 2.59 mm²/s

Gen 1 Macan